ATS-01
Programmable Automatic Transfer Switch (ATS) Controller
Home > Automatic Transfer Switch > ATS Controller > ATS-01
ATS-01 is the programmable micro-processor based design automatic transfer Switch (ATS) Controller. There is no need for PC connection or software driver, all operation and program can be accessed directly on ATS-01 front panel. Optional accessories of TSP-01 or TSP-02 transformer module and exclusive ATS harness can simplify the set up and connection time.
» Brochure | Manual | 3D Display | Controller AssemblyFeatures
- Micro-Processor Based Design
- Compact Size with User-Friendly LED Display
- Simple Push Button Programming & Operation (here is no need for PC connection or software--all operation can be done directly on ATS-01 front panel)
- Provides 3 or 1 Phase Volt. / Freq. Monitoring & Protection For Both Normal & Emergency Sources
- Transfer Fail Alarm, Pre-exerciser or Pre-transfer Signal Output
- Remote Engine Start Signal
- Built-in Weekly Exerciser Timer
- No Generator Battery Connection Needed (Program settings are auto-saved into memory and will remain saved even when power is disconnected)
Specifications
| Input Control Voltage | 160~250 VAC 50/60 Hz |
|---|---|
| Voltage Measurement Range | 80~550 VAC 50/60 Hz |
| Frequency Measurement Range | 45~70 Hz |
| Generator Start Relay | 7A @ 250 VAC Max. |
| Transfer to Normal Relay | 7A @ 250 VAC Max. |
| Transfer to Standby Relay | 7A @ 250 VAC Max. |
| Alarm output Auxiliary Relay | 0.5A @ 120 VAC 1.0A @ 24 VDC |
| Environment |
|
| 4 Digit 7 Segment LED Display |
|
| User-Friendly Status LED Display |
|
| All Phase Voltage & Frequency Monitoring |
|
| Panel Installation Cut-Out | 113.0 ± 0.5 mm x 168.0 ± 0.5 mm |
Mechanical Specifications
Related Products
![]() ATS-380 |
![]() CM0900 |

