ATS-380
Automatic Transfer Switch Controller 380V System
ATS-380 is the programmable micro-processor based design automatic transfer Switch (ATS) Controller with built in transformers for use on 380VAC system only. There is no need for PC connection or software driver, all operation and program can be accessed directly on ATS-380 front panel.
● Brochure ● Manual ● Controller Assembly
Features
- Micro-Processor Based Design
- Compact Size with User-Friendly LED Display
- Simple Push Button Programming & Operation (There is no need for PC connection or software -- all operations can be done directly on ATS-380 front panel)
- Provide 3 or 1 Phase Volt. / Freq. Monitoring & Protection For Both Normal & Emergency Sources
- Transfer Fail Alarm, Pre-exerciser or Pre-transfer Signal Output
- Remote Engine Start Signal
- Built-in Weekly Exerciser Timer
- No Generator Battery Connection Needed (Program settings are auto-saved into memory and will remain saved even when power is disconnected)
- * When the system voltage is different from 380 VAC, please use ATS-01 programmable ATS control module.
Specifications : ATS-380
| Input Control Voltage | 280~480 VAC 50/60 Hz |
|---|---|
| Voltage Measurement Range | 280~480 VAC 50/60 Hz |
| Frequency Measurement Range | 40~70 Hz |
| Generator Start Relay | 7A @ 250 VAC Max. |
| Transfer to Normal Relay | 7A @ 250 VAC Max. |
| Transfer to Standby Relay | 7A @ 250 VAC Max. |
| Alarm output Auxiliary Relay | 0.5A @ 120 VAC 1.0A @ 24 VDC |
| Environment | Operating Temperature : -20~70 °C Storage Temperature : -35~85 °C Operating Humidity : Maximum 95% |
| All Phase Voltage & Frequency Monitoring | Over Voltage Adjustable Range : 390~480 VAC Under Voltage Adjustable Range : 280~370 VAC Over Frequency Adjustable Range : 51~70 Hz Under Frequency Adjustable Range : 40~59 Hz |
| Adjustable Timers | TDNE : 0~300 sec. TDES : 0~30 sec. TDEN : 0~300 sec. TDEC : 0~300 sec. Pre-transfer Signal : 1~99 sec. Pre-exerciser Signal : 1~99 sec. Engine Exerciser Test Period : 1~60 min. |
| 4 Digit 7 Segment LED Display |
|
| User-Friendly Status LED Display |
|
| Panel Installation Cut-Out | 113.0 x 168.0 ± 0.5 mm |
Mechanical Specifications
ATS-01
CM0900