CM0900
Automatic Transfer Switch Controller 1 Phase 220V System
CM0900 is the basic programmable micro-processor based design automatic transfer Switch (ATS) Controller with built in transformers for use on 220VAC system only. There is no need for PC connection or software driver, all operation and program can be accessed directly on CM0900 front panel.
Brochure | Manual | Rotating Image | Controller Assembly
*When the system voltage is different from 1ø220 VAC, please use ATS-01 programmable ATS control module.
Features
- Micro-Processor Based Design
- Compact Size with User-Friendly Status LED Display
- Simple Push Button Operation
- Provide Over & Under Volt Monitoring & Protection For Normal Sources
- Remote Engine Start Signal
- Configurable TDEN TDNE TDES & TDEC Time Setting By DIP Switch
- Circuits Are Finger Safe With High Voltage Fuses & Epoxy Protection
- Provide AC220V For External Exerciser Timer
- Acceptable Plant Exerciser Test Signal Input
- No Generator Battery Connection Needed
Specifications
| Model NO. | CM0900 |
|---|---|
| Input Control Voltage | 160~280 VAC 50/60 Hz |
| Generator Start Relay | 7A @ 250 VAC Max. |
| Transfer to Normal Relay | 7A @ 250 VAC Max. |
| Transfer to Standby Relay | 7A @ 250 VAC Max. |
| Environment | Operating Temperature : -20~70 °C Storage Temperature : -35~85 °C Operating Humidity : Maximum 95% |
| Normal Source Voltage Monitoring | Over Voltage : 270 VAC Over Voltage Reset : 265 VAC Under Voltage : 180 VAC Under Voltage Reset : 185 VAC |
| Adjustable Timers | TDNE : 2, 10, 20 & 30 sec. TDES : 2, 5, 10 & 15 sec. TDEN : 2, 10, 120 & 300 sec. TDEC : 2, 30, 120 & 300 sec. |
| User-Friendly Status LED Display |
|
| Panel Installation Cut-Out | 113.0 x 168.0 ±0.5 mm |
| Dimensions | 180.0 (L) x 133.0 (W) x 48.0 (H) mm |
| Weight | 632g ±2% |
*Note : All features & specifications subject to change without notice.
Dimensions( UNIT : mm )
ATS-01
ATS-380
Website: 