AVR compatible with Marathon DVR2000 Series

ADVR-2200M

3.5 Amp Hybrid Analog/Digital AVR for Shunt, PMG/Aux. Winding Genset

ADVR-2200M is a hybrid Analog/Digital AVR which is compatible with Marathon DVR2000 Series. This voltage regulator can be used on single/three phase sensing and Shunt/PMG/Aux.Winding. It has PF (power factor) correction inputs and the facility for droop CT connection.

CE logo EN61204-3:2001 Certified

Brochure

Manual

Rotating Image

  • It can be used with KUTAI IVT Generator Excitation Booster to increase motor starting capacity.
  • If not for use with the IVT Generator Excitation Booster, the ADVR-2100M can be used instead,and purchased at a big discount.

Features

Optional : WR01 AVR wrench

  • Power input single phase 60 to 300 Vac @ 50 to 500 Hz
  • Sensing input 1 or 3 phase 220 to 600 Vac programmable
  • Voltage regulation < +/-0.5%
  • 50/60 Hz selectable
  • Multiple power input source SHUNT, AUX, HARMONIC, PMG
  • Inverse-time over excitation & under frequency protection
  • Soft start voltage ramping
  • Built-in high capacity protection fuse
  • Panel mounted, internal wiring external adjustment
  • Apply with KUTAI IVT-1260/IVT-2460 to exceeds normal generator motor starting capabilities

Specifications

Sensing Input
Voltage
220 to 600 Vac 1 or 3 phase selectable
Frequency
50/60 Hz selectable
Power Input
Voltage
60 to 300 Vac 1 phase
Frequency
50 to 500 Hz
Excitation Output
Voltage
Continuous 125 Vdc @ power input 220 Vac
Current
Continuous 3.5A
Intermittent 7A for 10 seconds
Resistance
≧ 13 ohms @ power input 110 Vac
≧ 25 ohms @ power input 220 Vac
Burden in Shunt & PMG Wiring 550 VA @ power input 110 Vac
1100 VA @ power input 220 Vac
Volts Regulation < +/-0.5% (with 4% engine governing)
Build Up Voltage Residual volts at AVR terminal > 5 Vac @ 25 Hz
Over Excitation Protection Inverse-time 125 +/-5 Vdc @ power input 220 Vac
External Volts Adjustment Max. +/-5% @ 500 ohms 1 watt potentiometer
Max. +/-10% @ 1000 ohms 1 watt potentiometer
Static Power Dissipation Max. 12 watts
EMI Suppression Internal electromagnetic interference filtering
Soft Start Ramp Time 4 seconds +/-10%
Voltage Thermal Drift < 3% at temperature range -40 to +70 °C
Analogue Input Input resistance > 2 kΩ
Max. Input +/-5 Vdc or +10 Vdc
Sensitivity 1 Vdc for 2.5% Generator Volts
Quadrature Droop Input CT 1A/5A > 5VA (DIP switch setting)
Sensitivity Max. +/-7% @ P.F +/-0.7
Under Frequency Protection
(Factory Setting)
50 Hz system presets knee point at 45 Hz
60 Hz system presets knee point at 55 Hz
Environment
Operating Temperature
-40 to +70 °C
Storage Temperature
-40 to +85 °C
Relative Humidity
Max. 95%
Vibration
5.5Gs @ 60 Hz
AVR Control Functions
VOLT
Voltage adjustment
STAB
Stability adjustment
U/F
Setting under frequency protection knee point
DROOP
Droop adjustment
TRIM
Analogue input adjustment
DIP
Voltage droop ratio setting
Indication LED
O/E LED
Over excitation protection indicator
U/F LED
Under frequency protection indicator
Dimension 150.0 (L) x 135.0 (W) x 55.5 (H) mm
5.91 (L) x 5.31 (W) x 2.19 (H) inch
Weight 470 g +/-2%
1.04 lb +/-2%

Dimension

CE Test Standards

  • EN61204-3:2001
    • CISPR 22 Class B
    • IEC61000-3-2:2005+A1:2800+A2:2009
    • IEC61000-3-3:2008
  • EN61204-3:2001
    • IEC61000-4-2:2008IEC61000-4-3:2006+A1:2007+A2:2010
    • IEC61000-4-4:2004+A1:2010IEC61000-4-5:2005
    • IEC61000-4-6:2008IEC61000-4-11:2004