The SMS-100 is a GSM/GPRS SMS Messaging System for use with KUTAI genset controllers and ATS controllers. The SMS-100 allows KUTAI programmable Genset Controllers, ATS Controllers, and Automatic Mains Failure controllers to be remotely monitored, controlled and configured by using a GPRS data connection to KUTAI GPRS server software, and each unit is also able to provide SMS alarm messages to notify up to five phone numbers.
KCU-02 module is required for connecting the SMS-100 to the controllers.
Quad band system: GSM 850, EGSM 900, DCS 1800, PCS1900
Transmission: Class 4(2W) at GSM 850 and EGSM 900, Class 1(1W) at DCS 1800 and PCS 1900
Obtain controller warning via SMS message
Activate GPRS or configure specific parameter setting
GPRS fails connection failure or terminate connection, system automatically change into auto-answer SMS mode
When a controller generated alarm message is not resolved, three-alarm trigger time interval can be set from 00:00 to 59:59 (min: sec) with maximum of 3 alarm repeats
Maximum of up to 5 sets of notifying telephone numbers
Record up to 32 sets of controller alarm messages (Including SMS command text message)
Password locked SMS command text message
Genset controllers and ATS controllers require KUTAI RS-485 communication module for connection to SMS-100
USB port for connecting to PC to monitor and configure settings via proprietary software (SMS100 Setup)
The SMS-100 connects via the Internet to our KUTAI GPRS Server software to monitor, as well as allow remote control and configuration of the genset controller or ATS controllers. The GPRS server software will run on any Windows PC or "virtual private server" or cloud computing platform allowing Windows apps
1. DC Input 7 to 70V / 2A 2. AC to DC Power supply 12V / 2A