Contact Us | Site Map | News | About Us | Test Report | Home

AMF-10

Automatic Mains Failure Control & Protection Module

Home > Genset Controller & Automatic Mains Failure > Generator Control Units > AMF-10

Automatic Mains Failure Control & Protection Modules

The AMF-10 is an universal Automatic Mains Failure Control & Protection Module. It is a control and protection module for the generator and a monitoring controller for the Automatic Transfer Switch. The modularity design with easy to read high illuminant LED display, universal warning symbols and easy to operate interface, all functions settings can be programmed directly from the front panel. Optional AMF-10R universal AMF Controller Interface Module (relay module) is available for the AMF-10 to simplify the wiring and connection process.

» Brochure | Manual | 3D Display

Features

Specifications

Power Input Voltage 9~36 VDC (12V , 24V)
Sensing Input Voltage 15~510 VAC
Frequency 50/60 Hz
Rated Output Capacity DC 10Amps @ 12/24 VDC
AC 8Amps @ 250 VAC
CT Secondary RatedAmps 5A
CT Specifications Burden 2.5VA
Power Dissipating Max. 7 Watt
Max. Vibration 5~25 Hz , ± 1.6 mm , 25~100 Hz , a=4g
4 Digit 7 Segment Easy-to-Read LED Display
  • Programmable Display with 3 Phase Volts,Amp & Freq.
  • Engine Operation Hours & Battery Voltage Display
  • Internal Program Settings & Status
  • Failure Signal Status By Graphic Display
Protection & Alarm Status
  • Engine Start Failure
  • High Coolant Temperature.
  • Engine Over Speed
  • Abnormal AC Voltage
  • Low Fuel Level
  • Maintain Service Alarm
  • Emergency Stop
  • Low Oil Pressure
  • Engine Under Speed
  • Generator Over Load
  • Abnormal Battery Voltage
  • Programmable Alarm
Environment
  • Operation Temperature : -20~70 °C
  • Relative Humidity : Maximum 95%
Panel Installation Cut-Out 137.0(L) x 137.0(W) ± 0.5 mm
Weight 610 g ± 2%

Mechanical Specifications

Mechanical Specifications

Related Products

Gensets Controllers
ECU-02
Digital Generating Sets Controllers
GCU-2000
Generator Controllers
GCU-10
Gensets Multi-Function Display Modules
DSP-10
Add-on Auto-Start Control Manual Key Start Gensets
ECU-04/05
Engine & Generator Controller with annunciator output
GCU-20
Remote Annunciator Module for Genset Controller
RA-20
Gensets Control and Protection Module
GCU-100
Manual Key Start Genset Controller for Generator Rental Market
GCU-30

▲Return to top

The microprocessor-based controller is characterized bytes customized programming availability which enables it to fit all kinds of Gensets.