ECU-04 / ECU-05
Manual Key Start Generator Sets Add-on Auto-Start Control
Home > Genset Controller & Automatic Mains Failure > Generator Control Units > ECU-04/ECU-05
The ECU-04 and ECU-05 12VDC and 24VDC, 100VAC to 240VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.
» Brochure | ECU-04 Manual | ECU-05 Manual | 3D DisplayFeatures
- Microprocessor Automatically Mimics The Manual Start Procedure
- Simple Installation, Without Changing Original Wiring
- Easy to Set Up, low-cost, Small Size, Low Power Consumption
- For Use In Gasoline And Diesel Generators
- Three Attempts Multi-Start Function
- Circuits Are Protected With 94-V0 Epoxy
- Two Adjustable Time Delay Potentiometers
Specifications
| DC Supply | 12 VDC (ECU-XX-12V) 24 VDC (ECU-XX-24V) |
|---|---|
| Alternator Input Range | Voltage 100 V ~ 240 VAC Frequency 50~60 Hz |
| Ignition & Accessories Signal Output | 30Amp @ 12/24 VDC |
| Start Signal Output | 30Amp @ 12/24 VDC |
| Pre-Heat or Carburetor Signal Output | 30Amp @ 12/24 VDC |
| Auxiliary Signal Output | 20Amp @ 12/24 VDC |
| Time Delay Setting And Alarm Indicator |
|
| Environment |
|
| Dimension | 150.0(L) x 100.0(W) x 31.0(H) mm |
| Weight | 380 gram |
Mechanical Specifications
| ECU-04 | ECU-05 | |
|---|---|---|
| SW On | For Use on Diesel Engine with Pre-Heat | For Use Terminal NO.3 with Pre-Heat Function |
| SW Off | For Use on Gasoline Engine with Carburetor | For Use Terminal NO.3 with Energize to Stop Function |
Related Products
 ECU-02 |
 GCU-2000 |
 GCU-10 |
 DSP-10 |
 AMF-10 |
 GCU-20 |
 RA-20 |
 GCU-100 |
 GCU-30 |