ECU-11 / ECU-22
Relay Module for ECU-02 12V & 24V
Home > Genset Controller & Automatic Mains Failure > Genset Controller Accessories > ECU-11/ECU-22
The ECU-11 (12VDC) and ECU-22 (24VDC) Generator-Set Controller Relay Board is an optional add on accessory for the ECU-02. It isolates ECU-02 from electric shock and greatly shortens the set up and maintenance time.
» Brochure | 3D DisplayFeatures
- Isolates ECU-02 From Electric Shock
- Provides Control Signals to Gen-set
- Simplify Genset Control Panel Assembly With Simple Harness With Plug-In Connectors
- Euro Standard Terminals with DIN Rail Base
- Simple Maintenance
- External High Capacity Relay Applicable
Mechanical Specifications
| Terminals | Function |
|---|---|
| J1 , J2 | Terminal plugs which connect to ECU-02 by harness sets |
| TB2 , TB3 | Terminal Strips which connect to Gen-set for control and sensing |
| Fuse | Function | Specifications |
|---|---|---|
| F1-F3 | AC Input Voltage Protection | 20 mm , 2A / AC 250V |
| F4 | ECU-02 DC input Protection | 20 mm , 2A / AC 250V |
| F5 | Signal Output Protection | 30 mm , 50A / DC 30V |
| Relay | Function | Specification |
|---|---|---|
| K1 | Warm Up Signal | DC 30V / 5Amp |
| K2 | Stop Signal | DC 30V / 30Amp |
| K3 | Start Signal | DC 30V / 30Amp |
| K4 | Auxiliary Signal | DC 30V / 5Amp |
| K5 | Pre-heat Signal | DC 30V / 30Amp |
| K6 | Alarm Signal | DC 30V / 5Amp |
Related Products
 PTU-03 |
 ECU-40 |
 TS-01 |
 PS-01 |
 GCU-10R |
 GCU-11R |
 AMF-10R |