GCU-10
Generator Control Unit
The GCU-10 Generator Control Unit is an universal economical programmable genset controller. Equipped with high illuminating LED with universal graphical interface helps to notify the operator the generator status. Optional relay module GCU-10R (12V/24V) and GCU-11R (12V/24V) helps to simplify the wiring and connection process.
● Brochure ● Manual ● 3D Display
Features
- Microprocessor Based Design
- Universal LED Graphic Interface, Displays Generator Status and Failures
- Modular Design, Quick Installation
- Programmable Engine & Generator Controls Adapts Easily To Any Type Generator Set.
- Waterproof Front Panel With UV Protection
- Provide IDLE control For Elec. Governors
- Five Adjustable Time Delay Potentiometers
- Five DIP Switches For Specification Setting
Specifications : GCU-10
| DC Supply | 9.0 to 36 VDC |
|---|---|
| Alternator Input Range | Voltage 5~300 VDC Frequency 50~60 Hz |
| Fuel Solenoid Signal Output | 5 Amp @ 12/24 VDC |
| Start Signal Output | 5 Amp @ 12/24 VDC |
| Warm up Signal Output | 5 Amp @ 12/24 VDC |
| Accessory " ON " Output | 5 Amp @ 12/24 VDC |
| Idle Control Conductor Capacity | 5 Amp @ 12/24 VDC |
| Power Consumption | Under 3 VA on Auto |
| Adjustable Timers | Engine Pre-Heat : 2~30 sec. Starter Cranking Time : 1~15 sec. Energize to STOP : 1~15 sec. Engine Idle (Governor) : 0~300 sec. Engine Cool-down : 0~300 sec. |
| Environment | Operation Temperature : -20~70 °C Relative Humidity : Maximum 90% |
| Protection & Alarm Status Indicators |
|
| Panel Installation Cut-Out | 66.0 x 66.0 ± 0.5 mm |
| Weight | 100 gram |
Mechanical Specifications
GCU-10R
GCU-11R