GCU-2000
Digital Genset PLC Control Unit
The GCU-2000 is the advanced Digital Genset PLC Control Unit. It delivers full genset warning and protection and equipped with most accurate water temperature and oil pressure sensor available on the market. The design is to be operation friendly with extra large easy to ready LCD display and graphical warning icons. The module requires no addition connection to a PC, all function settings can be programmed directly on the front panel. It's compatible with Deep Sea 5510 and Deep Sea 5620.
Features
- Micro-Processor Auto Control & Protection
- Easy to Read Large LCD Display
- Modularity Design, Easy to Install
- Provide Accurate Temperature and Oil Pressure Display
- Provide Full Engine & Generator Alarms Signals shutdowns
- All Functions Setting Can Be Done Directly On GCU-2000 No Need For PC Connection (Customized settings are auto-saved into memory and will remain even when power is off)
- Provide Emergency Stop and Voltage Adjustment On Front Panel
- Total Of 15 Memorable Event Logs (Provide gen-set run-in modulate model and manual start and stop functions, when user proceed modulate controller will shut down all protect functions)
Specifications : GCU-2000
| Power Input | Voltage 9~36 VDC (12V , 24V) |
|---|---|
| Sensing Input | Voltage 15~500 VAC , 3 Phase 4 Wire Frequency 50~60 Hz |
| MPU Signal Input | Voltage ± 2 ~ ± 70 VAC Frequency Min. 100 Hz , Max. 10 KHz |
| CT Specifications | Burden 2.5 VA |
| Power Dissipating | Max. 7 Watt |
| Max. Vibration | 5~25 Hz , ± 1.6 mm , 25~100 Hz , a=4g |
| Large LCD Display |
|
| Protection & Alarm Status |
|
| Environment | Operating Temperature : -20~70 °C Relative Humidity : Maximum 95% |
| Panel Installation Cut-Out | 251.5 x 157.0 ± 0.5 mm |
| Weight | 372g ± 2% |
Mechanical Specifications
TS-01
PS-01