Contact Us | Site Map | News | About Us | Test Report | Home

GCU-30

Manual Key Start Genset Control Unit

Home > Genset Controller & Automatic Mains Failure > Generator Control Units > GCU-30

Manual Key Start Genset Controller for Generator Rental Market

GCU-30 Manual Key Start Genset Control Unit has many useful functions and engine protections like the charge alternator failure protection. It's suitable for most available Rental market generators.

» Brochure | Manual | 3D Display

Features

Microprocessor Based Design
Universal LED Graphic Interface, Displays Generator Status and Failures
Modular Design, Quick Installation
Waterproof Front Panel With UV Protection
Charge Alternator Failure Protection
Two Push Button for Start and Pre-Heat
Three DIP Switches For Specification Setting
Suitable for Most Available Genset on The Rental Market

Specifications

Model	GCU-30
DC Supply	9.0 to 36 VDC
Rated AC Input Voltage	5~300 VAC
AC Frequency	50/60 HZ
Fuel Solenoid Signal Output	1.2Amp @ 12/24 VDC
Start Signal Output	1.2Amp @ 12/24 VDC
Preheat Signal Output	1.2Amp @ 12/24 VDC
Charge Motor Excitation Signal Output	12/24 VDC
Power Consumption	Under 3 VA
Protection & Alarm Status Indicators	High Water Temperature Protection Low Oil Pressure Protection Engine Over speed Protection Charge Alternator Failure Protection User Define Protection
System Setting	AC Frequency Setting → ON : 50Hz OFF : 60Hz Stop Mode → ON : Energized to Start OFF : Energized to Stop Engine Stop Timer Delay → ON : 20 sec OFF : 10 sec
Environment	Operating Temperature : -20~70 °C Relative Humidity : Maximum 90%
Panel Installation Cut-Out	66.0 ±0.5 mm x 66.0 ±0.5 mm
Weight	100 gram

Mechanical Specifications

Mechanical Specifications

Related Products

ECU-02	GCU-2000	GCU-10	DSP-10	ECU-04/05
AMF-10	GCU-20	RA-20	GCU-100

▲Return to top

The microprocessor-based controller is characterized bytes customized programming availability which enables it to fit all kinds of Gensets.