GCU-3000

Digital Genset PLC Controllers

The GCU-3000 is the advanced Digital Genset PLC Control Unit. It delivers full Genset wiring and protection and equipped with most accurate water temperature and oil pressure sensor available on the market. The design is to be operation friendly with extra large easy to read LCD display and graphical warning icons. The module requires no addition connection to a PC, all function settings can be programmed directly on the front panel. It is equipped with optional USB, RS485, and Ethernet remote communication functions to allow remote operation.

Features

  • Micro-Processor Auto Control & Protection
  • Easy to Read Large LCD Display
  • Modularity Design, Easy to Install
  • Provide Accurate Temperature and Oil Pressure Display
  • Provide Full Engine & Generator Alarms Signals shutdowns
  • All Functions Setting Can Be Done Directly On GCU-3000 No Need For PC Connection*1
  • Provide Emergency Stop and Voltage Adjustment On Front Panel*2
  • Total Of 15 Memorable Event Logs
  • Optional USB / RS485 / Ethernet Remote Communication Functions

*1 Customized settings are auto-saved into memory and will remain even when power is off.
*2 Provide gen-set run-in modulate model and manual start and stop functions, when user proceed modulate controller will shut down all protect functions.

Specifications

Model NO. GCU-3000
Power Input Voltage 8~60 VDC (12V , 24V)
AC Sensing Input Voltage 15~500 VAC
Frequency 50/60 Hz
Power Dissipating Max. 7 watt
MPU Signal Input Voltage ±2 ~ ±70 VAC
Frequency Min. 100 Hz , Max. 10 KHz
CT Specifications Burden 2.5 VA
Protection & Alarm Status Indicators
  • Engine Start Failure
  • Engine Over Speed
  • Sensor Failure
  • Abnormal AC Voltage
  • Low Engine Oil Pressure
  • Emergency Stop Activated
  • High Engine Temp.
  • MPU Failure
  • Generator Over Load
  • Abnormal Battery Voltage
Large LCD Display
  • Programmable Display with 3 Phase Volts, Amp & Freq.
  • Engine Operation Hours & Battery Voltage Display
  • Can Display Different Unit Of Temperature & Oil Pressure
  • Failure Signal Status By Graphic Display
Environment Operating Temperature : -20~70 °C
Relative Humidity : Maximum 95%
Max. Vibration : 5~25 Hz , ±1.6 mm    25~100 Hz , a=4g
Panel Installation Cut-Out 251.5 x 157.0 ±0.5 mm
Dimensions 290.0 (L) x 166.0 (W) x 70.0 (H) mm
Weight 1341g ±2%

*Note : All features & specifications subject to change without notice.

Dimensions( UNIT : mm )

Dimensions

Related Products :

Digital Temperature Sensor for GCU-2000TS-01 Ceramic Capacitive Oil Pressure Sensors for GCU-2000PS-01
USB / RS-485 / Ethernet Genset Communication ModulesKCU-01/02/03