Contact Us | Site Map | News | About Us | Test Report | Home

ACU230

A/C Power Controller for Telecommunication

Home > Other Generator Set Parts > ACU230

Automatic Control Transfer 2 Air Conditioners

ACU230 is the Cell Site A/C (Air Conditioner) Power Controller. It automatically Controls and monitor two air conditioners on a remote cell site without human supervision.

» Brochure | Manual | 3D Display

Description

ACU230 is designed for cell site or power site to keep suitable & accurate room temperature for devices. ACU230 can automatically control & transfer one or two air conditioners by following user's settings & sensing by an up-to 10 meter long digital temperature sensor cable. When temperature is lower than user's setting, ACU230 shuts down both air conditioners to save power. Under normal temperature condition, ACU230 can automatically transfer air conditioners by user's time setting in order to extend air conditioner's service life. ACU230 also monitors AC input power status to protect air conditioners from abnormal power source.
(No battery in needed for keeping user's settings, because it is automatically saved into memory, and will remain even when power is off)

Features

Specifications

Power Input Voltage 220 VAC ± 15%
Factory 50/60 Hz
Contact Capacity Max. 32Amp (Adjustable)
Temperature Factory Setting 23 °C
Adjustable 20~30 °C
Under Temp Factory Setting 20 °C
Adjustable 10~25 °C
Over Temp Factory Setting 29 °C
Adjustable 25~40 °C
Under Voltage Factory Setting 180 VAC
Adjustable 165~210 VAC
Over Voltage Factory Setting 250 VAC
Adjustable 230~270 VAC
Under Current Factory Setting 0 A
Adjustable 0~10 A
Over Current Factory Setting 20 A
Adjustable 5~50 A
Change Over Time Factory Setting 8 Hours
Adjustable 1~168 Hours
Temperature Precision 0.25 °C
4 Digit 7 Segment LED Display
  • Real Time Temperature Display
  • Real Time Voltage & Current Display
  • Setting Values Display
  • Interior Program Settings Display
Front Panel Buttons
  • F : Execute Function Settings
  • ▲ : Increase Setting Value
  • ▼ : Decrease Setting Value
  • R : Reset to Factory Settings
  • T : LED Test
  • P : Power On/Off

Mechanical Specifications

Mechanical Specifications

▲Return to top