EG4016 Digital Generator Governor Controller

EG4016

Generator Governor Controller No Magnetic Speed Pickup Needed

EG4016 uses the detected frequency of the input voltage to control generator engine speed so the magnetic speed pickup is not required. Applicable to all types of generator engines and also supports Cummins high-gain engine types (PT PUMP). *Newly add START FUEL VR to adjust Maximum Starting Fuel for smoke suppression.

EG Model Comparison Table

Features

  • Senses generator frequency, no magnetic pickup (MPU) is required
  • Applicable to all types of gas and diesel generator engines
  • Supports External, Internal, and PT Pump mounted types actuators
  • SPEED, GAIN, DIF potentiometers for easy adjustment
  • Idle & Speed Controls through the connection of an external potentiometer
  • Selectable functions of Engine Speed Ramping or Immediate Start
  • Loss Sensing, Overspeed, and actuator short circuit protections
  • Applicable for 12V/24V operating voltage with reverse polarity protections
  • Internal electromagnetic interference filtering
  • Moisture, vibration, and rust protected, epoxy encapsulated electronics

Specifications

  • Operating Voltage
  • 10 to 32 Vdc
  • Reverse Voltage Protection
  • Max. -50 Vdc
  • Output Current
  • Continuous 9A, Max. 15A for 10 seconds
  • Sensing Input Voltage Range
  • 1 to 600 Vac
  • Sensing Frequency Range
  • 5 to 100 Hz
  • EMI Suppression
  • Internal electromagnetic interference filtering
  • Steady State Speed Band
  • +/-0.25% (with stable load)
  • Idle Speed Frequency
  • 25 Hz @ 50 Hz
    30 Hz @ 60 Hz
  • Temperature Drift Frequency Range
  • 0.1 Hz @ -40 to +80 °C
  • External Frequency Control
  • +/-2 Hz 5K ohms 1 watt potentiometer
  • Static Power Dissipation
  • Min. 120 mA @ 12 Vdc
    Min. 60 mA @ 24 Vdc

DIP Switch Settings

  • OFF
  • ON
  • SW1 Actuator types
  • External or Internal mount
  • PT PUMP mount
  • SW2 Ramp time
  • 10 seconds ramp time
  • Immediate start
  • SW3 Frequency
  • 60 Hz
  • 50 Hz

Governor Controls

  • START FUEL
  • Maximum starting fuel adjustment
  • SPEED
  • 50 Hz : 45 to 55 Hz
    60 Hz : 55 to 65 Hz
  • DIF
  • PID differential adjustment
  • GAIN
  • PID actuator output gain adjustment

Environment

  • Operating Temperature
  • -40 to +80 °C
  • Storage Temperature
  • -40 to +85 °C
  • Relative Humidity
  • Max. 95%
  • Vibration
  • 5.0 Gs @ 60 Hz

Physical Specifications

  • Dimensions
  • 162.0 (L) x 112.0 (W) x 43.0 (H) mm
    6.38 (L) x 4.40 (W) x 1.69 (H) inch
  • Weight
  • 330 g +/-2%
    0.73 lbs +/- 2%

Downloads

Dimensions