ADVR-440 Newage Stamford AS440 direct replacement, SX440 compatible replacement

ADVR-440

Hybrid Analog/Digital Single Phase sensing 4Amp Automatic Voltage Regulator for self-excited (shunt) generators

ADVR-440 is a direct replacement for Newage Stamford AS440 and also compatible with SX440. It's equipped with Quadrature Droop Input for parallel operation, Over Excitation Protection, Soft Start Voltage Ramping Function, Digital Voltage Sensing and Under Frequency Protection Circuit which effectively reduces the thermal drift.

Features

  • Digital Voltage Sensing and Under Frequency Protection circuits reduce thermal drift
  • Soft start voltage ramping
  • Over excitation protection
  • Quadrature Droop Input for parallel operation
  • EMI suppression
  • Built-in high capacity fuse

Specifications

  • Sensing Input (Average Reading)
  • Voltage 90 to 130 Vac @ 110 Vac 1 phase 2 wire
    Voltage 180 to 260 Vac @ 220 Vac 1 phase 2 wire
    Frequency 50/60 Hz Jumper setting
  • Power Input
  • Voltage 40 to 300 Vac 1 phase 2 wire
    Frequency 40 to 60 Hz
  • Excitation Output
  • Continuous 63 Vdc 4A @ 220 Vac 1 phase Max. 90 Vdc 7.5A for 10 seconds
    >Resistance Min. 15 ohms Max. 100 ohms
    >Fuse Spec. Slow blow 5 x 20 mm S505-6.3A
  • External Voltage Adjustment
  • Max. +/-10% @ 1K ohm 1 watt potentiometer
  • Voltage Regulation
  • Less than +/-0.5% (with 4% engine governing)
  • Build Up Voltage
  • 5Vac 25Hz residual volts at power input terminal
  • Soft Start Ramp Time
  • 4 seconds +/-10%
  • Typical System Response
  • Less than 20 milliseconds
  • EMI Suppression
  • Internal electromagnetic interference filtering
  • Static Power Dissipation
  • Max. 4 watts
  • Quadrature Droop Input
  • Max. sensitivity 0.07A for 5% droop
    Max. input 0.33A
  • Analogue Voltage Input
  • +/-5 Vdc or +10 Vdc, 5% @ 1 Vdc
  • Under Frequency Protection (Factory Presets)
  • 50 Hz system knee point at 45 Hz
    60 Hz system knee point at 55 Hz
  • Over Excitation Protection
  • Set point 20 to 55V @ 110V
    Set point 40 to 110V @ 110V
  • Voltage Thermal Drift
  • Less than 3% at -40 to +70 °C
  • Under Frequency Knee Point Thermal Drift
  • Less than +/-0.1 Hz at -40 to +70 °C

Environment

  • Operating Temperature
  • -40 to +60 °C
  • Storage Temperature
  • -40 to +85 °C
  • Relative Humidity
  • Max. 95%
  • Vibration
  • 5.5 Gs @ 60 Hz

Physical Specifications

  • Dimensions
  • 135.0 (L) x 100.0 (W) x 45.0 (H) mm
    5.31 (L) x 3.94 (W) x 1.77 (H) inch
  • Weight
  • 405 g +/-2%
    0.89 lb +/-2%

Downloads

Dimensions

Rotating Image

Accessories

  • M5L35 Screw
  • x 4
  • Jumper Terminals
  • x 1
  • Adjustment Tool
  • x 1