EA341 MX341 Replacements Voltage Regulator Permanent Magnet Generators

EA341

Permanent Magnet Generator Automatic Voltage Regulator

EA341 Permanent Magnet Generator type voltage regulator is a compatible replacement for Newage Stamford MX341 and Onan 305-0846.

Features

  • Voltage regulation less than +/-1%
  • 3 phase PMG power input
  • For use in parallel operation
  • Adjustable EXC TRIP, DIP, TRIM and DROOP functions
  • Soft start voltage ramping
  • Under frequency roll off protection
  • UFRO and over excitation LED indicators

Specifications

  • Sensing Input
  • Voltage 190 to 264 Vac 1 phase 2 wire
    Frequency 50/60 Hz selectable
  • Power Input (PMG)
  • Voltage 170 to 220 Vac 3 phase 3 wire
    Current 3A / phase
    Frequency 100 to 120 Hz nominal
  • Excitation Output
  • Voltage Max. 120 Vdc @ power input 220 Vac
    Current Continuous 2.7A Intermittent 6A for 10 seconds
    Resistance Min. 15 ohms
  • External Voltage Adjustment
  • Max. +/-10% @ 1K ohm 1 watt potentiometer
  • Voltage Regulation
  • Less than +/-1% (with 4% engine governing)
  • Build Up Voltage
  • 5Vac residual volts at power input terminal
  • Soft Start Ramp Time
  • 2 seconds +/-10%
  • Static Power Dissipation
  • Max. 12 watts
  • Analogue Voltage Input
  • Input Resistance 1K ohm
    Max. Input +/-5 Vdc
    Sensitivity 1V for 5% generator volt
  • Quadrature Droop Input
  • Burden 10 ohms
    Max. Input 0.33A
    Max. Sensitivity 0.07A for 5% droop (PF=0)
  • Over Voltage Detector Input
  • Set Point 300V
    Time Delay 1 second (fixed)
    CB Trip Coil Volts 10 to 30 Vdc / 0.5 Amp
    CB trip coil resistance 20 to 60 ohms
  • Current Limit Input
  • Burden 10 ohms
    Sensitivity Range 0.5 to 1A
  • Under Frequency Protection (Factory Presets)
  • Set Point 95% Hz
    Slope 170% down to 30 Hz
  • Over Excitation Protection
  • Set Point 90 Vdc
    Time Delay 10 seconds (fixed)
  • Voltage Thermal Drift
  • Less than 3% at temperature range -40 to +70 °C

AVR Control Functions

  • VOLT
  • Voltage adjustment
  • STAB
  • Stability adjustment
  • UFRO
  • Setting under frequency protection knee point
  • DROOP
  • To set the Droop to 5% at PF=0
  • TRIM
  • To optimize analogue input sensitivity
  • EXC TRIP
  • Over excitation trip level set
  • DIP
  • Hz related voltage DIP set

Environment

  • Operating Temperature
  • -40 to +70 °C
  • Storage Temperature
  • -40 to +85 °C
  • Relative Humidity
  • Max. 95%
  • Vibration
  • 3.3 Gs @ 100 to 2K Hz

Physical Specifications

  • Dimensions
  • 150.0 (L) x 135.0 (W) x 48.0 (H) mm
  • Weight
  • 394 g +/-2%

Downloads

Dimensions

Rotating Image