Digital Temperature Sender


Digital Temperature Sender
(Accessory for Kutai GC4K Digital Genset Control Unit)

With exceptional vibration tolerance, it is the most accurate temperature sender available with accuracy -25°C to 100°C +/-2.0°C.


  • Accuracy -25°C to +100°C +/-2.0°C (Max.)
  • Broad operating temperature range -55°C to +125°C
  • Minimum precision 0.5°C / step
  • ESD protection up to 2000V
  • Transmission range up to 30M
  • Special IP65 rated waterproof connection provides excellent protection
  • Suitable for use in extreme vibration environments
  • All units are the same, requiring no calibration after replacement
  • Excellent output signal linearity – requires no adjustment when installed
  • Built-in temperature sensing IC provides much better accuracy than traditional thermocouple or impedance type temperature senders

Electrical Specifications

Operating Voltage 3.0 – 5.5 Vdc
Max. Current 1.0 mA
Accuracy -25 to +100 °C +/-2.0 °C
Display Precision 0.5°C / Step
Destruction temperature 260°C (10 seconds)
ESD protection 2000V
Output Interface SMBus Interface
Thread M16-1.5 (optional adapter)
Ingress Protection IP65
Operating Temperature -55 to +125 °C
Vibration 5Gs @ 60 Hz
Weight 50 g +/-2%


Diagram & Dimensions


Part NO. Function
Standard Accessories
HU-250-TS03 2.5M cable connects TS-03 to GC4K control unit
Optional Accessories
HU-500-TS03 5.0M cable connects TS-03 to GC4K control unit
CU-12-TS03 Threaded connector, M16-1.5 (turn) M12-1.5
CU-14-TS03 Threaded connector, M16-1.5 (turn) M14-1.5