GCU-30 Manual Key Start Genset Controller for Generator Rental Market

GCU-30

Manual Key Start Genset Control Unit

GCU-30 Manual Key Start Genset Control Unit has many useful functions and engine protections like the charge alternator failure protection. It's suitable for most available Rental market generators.

Features

  • Microprocessor based design
  • LED status indicator with graphic interface
  • Modular design with easy installation
  • UV protection with minimum waterproofing (IP51)
  • Charge alternator failure protection
  • Start and Pre-Heat function push button
  • Three DIP switches for configuration
  • Suitable for most available genset on the rental market

Specifications

  • DC Supply
  • 9 to 36 Vdc
  • Rated AC Input Voltage
  • 5 to 300 Vac
  • AC Frequency
  • 50/60 Hz
  • Fuel Solenoid Signal Output
  • 1.2 Amp @ 12/24 Vdc
  • Start Signal Output
  • 1.2 Amp @ 12/24 Vdc
  • Preheat Signal Output
  • 1.2 Amp @ 12/24 Vdc
  • Charge Motor Excitation Signal Output
  • 12/24 Vdc
  • Power Consumption
  • Under 3 watts

System Setting

  • ON
  • OFF
  • SW1 AC Frequency Setting
  • 50 Hz
  • 60 Hz
  • SW2 Stop Mode
  • Energized to Start
  • Energized to Stop
  • SW3 Engine Stop Timer Delay
  • 20 seconds
  • 10 seconds

Protection and Alarm Status Indicators

  • High Coolant Temperature Protection
  • Low Oil Pressure Protection
  • Engine Over speed Protection
  • Charge Alternator Failure Protection
  • User Define Protection

Environment

  • Operating Temperature
  • -20 to +60 °C
  • Storage Temperature
  • -40 to +85 °C
  • Relative Humidity
  • Less than 90%

Physical Specifications

  • Panel Cut-Out
  • 66.0 x 66.0 +/-0.5 mm
  • Dimensions
  • 72.0 (L) x 72.0 (W) x 37.0 (H) mm
  • Weight
  • 101 g +/-2%

Downloads

Dimensions

Rotating Image