Interface for Remote Communication Module for BTB type ATS

CTM-25

BTB Type ATS All-In-One Current Transformer (CT)& Communication Module

Exclusive accessory for Programmable BTB Type Automatic Transfer Switch (ATS). BTB Type ATS All-In-One Current Transformer (CT) & Communication Interface Module. An optional add-on module to provides BTB controller with load current readings and integrated remote communication module connection interface to simplify connection and space saving.

Features

  • One piece integrated Current Transformer and Communication Interface, for increased convenience and space saving
  • Exclusive for BTB type ATS with trouble free connection
  • Provide load current reading for single and three phase system
  • Plug and play, no configuration required
  • Connect up to two KCU-XX communication modules
  • Mistake-proof connection design
  • Wiring cable-tie fixture design
  • Power input and Connection status indicator
    GREEN indicator (Constant) : Power input connected
    RED indicator (Flashing) : In communication with BTB
    RED indicator (Constant) : BTB & CTM-25 Connection lost

Specifications

  • DC Power Input
  • 9 to 36 Vdc
  • Current Display
  • 0 to 250 A +/-1.5%
  • Static Power Dissipation
  • Under 1W @ 12 Vdc
  • Dimensions
  • 142.0 (L) x 147.0 (W) x 35.5 (H) mm
    5.59 (L) x 5.79 (W) x 1.40 (H) inch
  • Weight
  • 188 g +/-2%
    0.41 lb +/-2%

Environment

  • Operating Temperature
  • -20 to +60 °C
  • Storage Temperature
  • -30 to +80 °C
  • Relative Humidity
  • Below 95%

Downloads

Dimensions


Installation Instructions

Rotating Image

Accessories

  • Standard
  • HU-025-KCU-09
  • 250 mm Connection Harness
  • x 1
  • Optional
  • HU-050-KCU-09
    HU-100-KCU-09
  • 500 mm Connection Harness
    1000 mm Connection Harness